The Coal briquette machine can press the crushed coal into blocks, which is convenient for transportation and storage, and is also conducive to use. The Coal briquette machine has strict requirements on the pressed materials, and the quality of the materials will directly affect the effect of pressing the good products. Therefore, the material screening should be done before the Coal briquette machine works.

 

First, dry the raw materials. Because the humidity of the material directly affects the degree of effectiveness of the adhesive briquette, the drying effect is mainly to effectively control the humidity of the raw coal and the smooth bonding of the coal. For example, if the paste is hydrophobic, once the moisture exceeds 4%, the adhesive will greatly reduce its effectiveness.

 

Secondly, the upstream raw materials are crushed. , Its function is to reduce the air between the raw material particles and arrange them as compactly as possible between the particles; secondly, to ensure uniform size, such effective distribution of coal adhesives, and enhance the material particles of the coal Coal briquette machine molding pressure. But there is a misunderstanding that must be paid attention to, whether the size of the coal particles is as small as possible.

 

Third, raw materials and auxiliary materials. According to the predetermined configuration of the ratio, by according to a certain proportion of the binder preparation, the preparation can be appropriately adjusted according to the actual situation.

 

, mix the raw materials. The ultimate goal is to ensure the final binder material in order to improve the effectiveness of the agglomerate binder to prevent secondary pollution and get better raw Coal briquette machine and coal mixing.

 

Before working, the Coal briquette machine should pay attention to the screening and processing of the above four aspects of the material, which will not only make the product quality high, but also greatly improve the pressing efficiency of the briquette machine.