During the use of coconut shell charcoal making machine, we tend to ignore a cost, which is electricity consumption. The increase in electricity consumption will also increase our costs. How to minimize the electricity consumption of coconut shell charcoal making machine?

 

In fact, in the use of coconut shell charcoal making machine, the most important point is to choose a few machines according to needs, and try to start the machine as little as possible. In addition, you must grasp the timing of feeding, start the motor in sequence, and prohibit starting at the same time; when feeding, follow the correct steps and use a reasonable feeding method to control the current. Too large or too small is not suitable. Especially after adding materials, the sudden start-up can easily cause the current to run high, blocking the machine or burning the motor; the lighting used in coal rod making should be packaged separately, and the switch should be turned off in time when not in use during the day; avoid overload operation or insufficient feeding to cause idling; the coconut shell charcoal making machine is very sensitive to a small amount of hard objects such as iron, and the machine head can be blocked in a light case, causing the current to increase; in severe cases, it will not only damage the bearings and gearbox, but also burn the motor; the dust on the motor and distribution cabinet should be handled in time; before starting the machine each time, check the motor terminal, check whether the wires and power supply are normal; to achieve the purpose of saving electricity, choosing the right type of motor is the most fundamental. Therefore, according to the needs of the coconut shell charcoal making machine, choose a more energy-saving and efficient motor to make it reasonably configured.

 

In this way, the power consumption of the coconut shell charcoal making machine will reach a minimum value, and naturally it will be able to save costs. Although we sometimes don’t care about the power consumption in the process of using the coconut shell charcoal making machine, it is also a terrible thing to accumulate a little, so we should still learn how to reduce the power consumption of the coal rod machine.