Introduction to dry powder ball press machine: Dry powder ball press machine is also commonly referred to as high-pressure dry powder ball press machine. It belongs to a series of briquetting machines and is also a product that has reached the pinnacle in the field of briquetting machines. Dry briquetting is adopted. The materials that need to be formed are all of large fineness, and no water needs to be added during the entire briquetting process. Hydraulic jacking, due to the huge load carried by the dry powder ball press machine, the ordinary mechanical jacking roller can no longer meet the needs, so it is necessary to be equipped with a hydraulic jacking device to automatically replenish the pressure as needed. Due to the high ball pressure and special materials, this requires that the core component of the dry powder ball press machine, the roller skin, is not made of ordinary cast steel, but is forged with alloy steel, and then quenched and heat treated as a whole, so that the hardness of the roller skin is basically close to the hardness of bearing steel. In short, high power and high pressure are the main characteristics of dry powder ball press machine.

The composition of the dry powder ball press machine includes a motor, a reducer, a V-belt, a roller, an open gear, a casing, a base, a pressurized feeding device, a pressurizing device, and a discharging device. The roller skin is assembled in combination and can be replaced after wear. The dry powder ball press machine is designed with an adjustable ball bowl device so that the two rollers are always within the adjustable range and never misaligned. The dry powder ball press machine does not need to add a binder when pressing the ball, and the material can be directly pressed into shape. It is widely used in refractory materials, power plants, metallurgy, chemical industry, energy, transportation, heating and other industries.

Performance characteristics of dry powder ball press machine:

1. Wide range of applications: dry powder ball press machine can be used to press iron powder, aluminum powder, iron oxide, carbon powder, slag, gypsum, tailings, sludge, kaolin, activated carbon, coke and other powders, powders, waste materials, waste slag, widely used in refractory materials, power plants, metallurgy, chemical industry, energy, transportation, heating and other industries.

2. High economic benefits: The materials formed by the dry powder ball press machine are easy to transport and improve the utilization rate of waste materials, with good economic and social benefits.

3. Rich supporting equipment: Complete supporting products for dry powder ball press equipment, providing a one-stop solution.

4. Worry-free service throughout the process: The equipment is easy to maintain and has low loss. If you encounter technical problems during use, you can contact us at any time. We promise to provide 24-hour all-round technical support to solve your worries. According to different regions in the country, the uses of the formed balls are different, and customers also have different shapes of formed balls in the dry powder ball press machine. Common forming shapes are: square, egg-shaped, elliptical, goose egg-shaped, pillow-shaped, etc. The common ball effects are as follows. Users can customize the specific size and special shape of the ball according to their needs.

Working principle of dry powder ball press machine: The main engine of the dry powder ball press machine is powered by an electromagnetic speed regulating motor, which is transmitted to the active shaft through a pulley, a cylindrical gear reducer, and a rod pin coupling. The active shaft and the passive shaft are guaranteed to run synchronously through open gears. A hydraulic device is installed behind the passive bearing seat. The screw feeding device is driven by an electromagnetic speed regulating motor, which rotates through a pulley and a worm reducer to force the pressed material into the main feed port. Due to the constant torque characteristics of the electromagnetic speed regulating motor, when the pressing amount of the screw feeder is equal to the amount of material required by the main machine, a constant feeding pressure can be maintained to stabilize the quality of the pellets. If the feeding amount is too large, the feeding device will be electrically overloaded; if the feeding amount is too small, no balls will be formed. Therefore, skilled operation is an important condition to ensure the normal operation of the energy-saving pellet press.

Precautions for the operation of the dry powder ball press machine:

1: Material selection: When selecting materials, factors such as the viscosity, humidity, and particle size of the materials need to be considered and adjusted accordingly.

2: Addition of adhesives: Appropriate adhesives can improve the binding force of the materials, but too much adhesive can cause particle blockage.

3: Roller adjustment: The distance between the rollers needs to be adjusted appropriately according to the different materials to ensure that the shape and size of the particles meet the requirements.

4: Pressure control: The dry powder ball press machine needs to maintain a stable pressure to ensure the stability of the yield rate.

5: Use of lubricating oil: The dry powder ball press machine needs to add lubricating oil regularly to ensure the normal operation of the equipment. Correct operation and maintenance can effectively improve the service life and production efficiency of the equipment.